JNTU Kakinada B-Tech 3-2 RT32016A ENVIRONMENTAL POLLUTION AND CONTROL R13 April 2018 Question Paper

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) Enlist various indoor and outdoor pollution sources. [3M]
b) Explain the significance of Equalization in Industrial Waste water management [4M]
c) What are solid wastes? How solid wastes are disposed ultimately? [4M]
d) State the basis for assessing the rural sanitation options. [4M]
e) What is meant by low level Radioactive wastes? [4M]
f) Define the term sustainable development. [3M]
PART ?B
2 a) Discuss in detail various air quality parameters and their limitations to be suitable
for daily needs.
[8M]
b) What are the sources of Noise Pollution? Explain in detail. [8M]
3 a) Explain the process involved in Neutralization and Proportioning of waste. [8M]
b) State the strategies of pollution control along with the appropriate techniques
adopted.
[8M]
4 a) Explain in detail the solid waste management hierarchy. [8M]
b) Discuss in brief the steps involved in control measures of solid waste.
[8M]
5 a) State the factors governing the valuable environmental sanitation for Hotels. [8M]
b) Explain the working principle involved in any one low cost sanitation method.
[8M]
6 a) Discuss in brief the disposal methods of hazardous waste. [8M]
b) Enumerate the characteristics of Electronic and Chemical wastes.
[8M]
7 a) Write a short note on cleaner production in achieving sustainability. [8M]
b) Enumerate various indicators of sustainability and explain how do they contribute
to development.
[8M]

*****

R13
SET – 1 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) Enlist various indoor and outdoor pollution sources. [3M]
b) Explain the significance of Equalization in Industrial Waste water management [4M]
c) What are solid wastes? How solid wastes are disposed ultimately? [4M]
d) State the basis for assessing the rural sanitation options. [4M]
e) What is meant by low level Radioactive wastes? [4M]
f) Define the term sustainable development. [3M]
PART ?B
2 a) Discuss in detail various air quality parameters and their limitations to be suitable
for daily needs.
[8M]
b) What are the sources of Noise Pollution? Explain in detail. [8M]
3 a) Explain the process involved in Neutralization and Proportioning of waste. [8M]
b) State the strategies of pollution control along with the appropriate techniques
adopted.
[8M]
4 a) Explain in detail the solid waste management hierarchy. [8M]
b) Discuss in brief the steps involved in control measures of solid waste.
[8M]
5 a) State the factors governing the valuable environmental sanitation for Hotels. [8M]
b) Explain the working principle involved in any one low cost sanitation method.
[8M]
6 a) Discuss in brief the disposal methods of hazardous waste. [8M]
b) Enumerate the characteristics of Electronic and Chemical wastes.
[8M]
7 a) Write a short note on cleaner production in achieving sustainability. [8M]
b) Enumerate various indicators of sustainability and explain how do they contribute
to development.
[8M]

*****

R13
SET – 1 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) How do you measure the Air quality? State the various air quality and their
consequences.
[4M]
b) State the regulations to be followed for Industrial waste water. [3M]
c) Show the structure of solid wastes. [3M]
d) State the factors affecting the suitability of sanitation system. [4M]
e) Give the detailed classification of Nuclear wastes. [4M]
f) Explain the evolution of sustainable development. [4M]
PART ?B
2 a) Discuss in detail various controlling methods of air pollution. [8M]
b) State the various parameters for evaluating the noise pollution along with the
standards.
[8M]
3 a) Explain in detail the understanding required for flow equalization and
proportioning in IWWM.
[8M]
b) Discuss in brief various effluent standards that need to be maintained for its proper
disposal.
[8M]
4 a) Show the types of wastes along with the amount of time to generate the same. [8M]
b) By means of neat sketch, explain in brief the three types of Combustion methods
adopted for solid waste management.
[8M]
5 a) What are the criteria for an acceptable sanitation options for Hostels? Explain in
brief.
[8M]
b) Differentiate between the environmental sanitation process and parameters
involved in Schools and Swimming pools.
[8M]
6 a) What is meant by Biomedical waste? Enumerate the steps in the management of
biomedical waste.
[8M]
b) Discuss in brief the management process involved in Hazardous waste.
[8M]
7 a) What are the different forms of energy contributing towards sustainable
development? Discuss in brief.
[8M]
b) Write a detailed note on strategies adopted for sustainable development. [8M]
*****
R13
SET – 2 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) Enlist various indoor and outdoor pollution sources. [3M]
b) Explain the significance of Equalization in Industrial Waste water management [4M]
c) What are solid wastes? How solid wastes are disposed ultimately? [4M]
d) State the basis for assessing the rural sanitation options. [4M]
e) What is meant by low level Radioactive wastes? [4M]
f) Define the term sustainable development. [3M]
PART ?B
2 a) Discuss in detail various air quality parameters and their limitations to be suitable
for daily needs.
[8M]
b) What are the sources of Noise Pollution? Explain in detail. [8M]
3 a) Explain the process involved in Neutralization and Proportioning of waste. [8M]
b) State the strategies of pollution control along with the appropriate techniques
adopted.
[8M]
4 a) Explain in detail the solid waste management hierarchy. [8M]
b) Discuss in brief the steps involved in control measures of solid waste.
[8M]
5 a) State the factors governing the valuable environmental sanitation for Hotels. [8M]
b) Explain the working principle involved in any one low cost sanitation method.
[8M]
6 a) Discuss in brief the disposal methods of hazardous waste. [8M]
b) Enumerate the characteristics of Electronic and Chemical wastes.
[8M]
7 a) Write a short note on cleaner production in achieving sustainability. [8M]
b) Enumerate various indicators of sustainability and explain how do they contribute
to development.
[8M]

*****

R13
SET – 1 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) How do you measure the Air quality? State the various air quality and their
consequences.
[4M]
b) State the regulations to be followed for Industrial waste water. [3M]
c) Show the structure of solid wastes. [3M]
d) State the factors affecting the suitability of sanitation system. [4M]
e) Give the detailed classification of Nuclear wastes. [4M]
f) Explain the evolution of sustainable development. [4M]
PART ?B
2 a) Discuss in detail various controlling methods of air pollution. [8M]
b) State the various parameters for evaluating the noise pollution along with the
standards.
[8M]
3 a) Explain in detail the understanding required for flow equalization and
proportioning in IWWM.
[8M]
b) Discuss in brief various effluent standards that need to be maintained for its proper
disposal.
[8M]
4 a) Show the types of wastes along with the amount of time to generate the same. [8M]
b) By means of neat sketch, explain in brief the three types of Combustion methods
adopted for solid waste management.
[8M]
5 a) What are the criteria for an acceptable sanitation options for Hostels? Explain in
brief.
[8M]
b) Differentiate between the environmental sanitation process and parameters
involved in Schools and Swimming pools.
[8M]
6 a) What is meant by Biomedical waste? Enumerate the steps in the management of
biomedical waste.
[8M]
b) Discuss in brief the management process involved in Hazardous waste.
[8M]
7 a) What are the different forms of energy contributing towards sustainable
development? Discuss in brief.
[8M]
b) Write a detailed note on strategies adopted for sustainable development. [8M]
*****
R13
SET – 2 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)
Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) What is the significance of Smog in Air pollution? [3M]
b) Show by means of diagram the treatment process unit operations involved in
industrial wastewater management.
[4M]
c) List out the components involved in municipal solid waste. [4M]
d) Define the term: Sanitation and the measure adopted for the same. [4M]
e) Give the detailed classification of disposal of hazardous waste. [4M]
f) What are the various elements to be considered in sustainable development? [3M]
PART ?B
2 a) Explain in detail about the effects and sources of Carbon Monoxide and Sulfur
dioxide pollutants.
[8M]
b) What are the various sources and effects of Noise pollution? Explain each in
detail.
[8M]
3 a) Discuss in detail about various important contaminants of Concern in Industrial
Wastewater management.
[8M]
b) State and explain any two strength reduction methods of waste.
[8M]
4 a) Give the detailed classification of wastes according to their origin and type. [8M]
b) Explain the 4R?s concept in solid waste management.
[8M]
5 a) Discuss the treatment parameters involved in sanitation of public bathing places. [8M]
b) State the factors governing the sanitation process at social gatherings.
[8M]
6 a) Enumerate the characteristics of Electronic wastes. [8M]
b) What are the various economical control methods adopted for nuclear hazardous
wastes.
[8M]
7 a) Discuss the importance of Climate change and Biodiversity in sustainable
development.
[8M]
b) State the impacts of industrialization on sustainable development. [8M]
*****

R13
SET – 3 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) Enlist various indoor and outdoor pollution sources. [3M]
b) Explain the significance of Equalization in Industrial Waste water management [4M]
c) What are solid wastes? How solid wastes are disposed ultimately? [4M]
d) State the basis for assessing the rural sanitation options. [4M]
e) What is meant by low level Radioactive wastes? [4M]
f) Define the term sustainable development. [3M]
PART ?B
2 a) Discuss in detail various air quality parameters and their limitations to be suitable
for daily needs.
[8M]
b) What are the sources of Noise Pollution? Explain in detail. [8M]
3 a) Explain the process involved in Neutralization and Proportioning of waste. [8M]
b) State the strategies of pollution control along with the appropriate techniques
adopted.
[8M]
4 a) Explain in detail the solid waste management hierarchy. [8M]
b) Discuss in brief the steps involved in control measures of solid waste.
[8M]
5 a) State the factors governing the valuable environmental sanitation for Hotels. [8M]
b) Explain the working principle involved in any one low cost sanitation method.
[8M]
6 a) Discuss in brief the disposal methods of hazardous waste. [8M]
b) Enumerate the characteristics of Electronic and Chemical wastes.
[8M]
7 a) Write a short note on cleaner production in achieving sustainability. [8M]
b) Enumerate various indicators of sustainability and explain how do they contribute
to development.
[8M]

*****

R13
SET – 1 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) How do you measure the Air quality? State the various air quality and their
consequences.
[4M]
b) State the regulations to be followed for Industrial waste water. [3M]
c) Show the structure of solid wastes. [3M]
d) State the factors affecting the suitability of sanitation system. [4M]
e) Give the detailed classification of Nuclear wastes. [4M]
f) Explain the evolution of sustainable development. [4M]
PART ?B
2 a) Discuss in detail various controlling methods of air pollution. [8M]
b) State the various parameters for evaluating the noise pollution along with the
standards.
[8M]
3 a) Explain in detail the understanding required for flow equalization and
proportioning in IWWM.
[8M]
b) Discuss in brief various effluent standards that need to be maintained for its proper
disposal.
[8M]
4 a) Show the types of wastes along with the amount of time to generate the same. [8M]
b) By means of neat sketch, explain in brief the three types of Combustion methods
adopted for solid waste management.
[8M]
5 a) What are the criteria for an acceptable sanitation options for Hostels? Explain in
brief.
[8M]
b) Differentiate between the environmental sanitation process and parameters
involved in Schools and Swimming pools.
[8M]
6 a) What is meant by Biomedical waste? Enumerate the steps in the management of
biomedical waste.
[8M]
b) Discuss in brief the management process involved in Hazardous waste.
[8M]
7 a) What are the different forms of energy contributing towards sustainable
development? Discuss in brief.
[8M]
b) Write a detailed note on strategies adopted for sustainable development. [8M]
*****
R13
SET – 2 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)
Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) What is the significance of Smog in Air pollution? [3M]
b) Show by means of diagram the treatment process unit operations involved in
industrial wastewater management.
[4M]
c) List out the components involved in municipal solid waste. [4M]
d) Define the term: Sanitation and the measure adopted for the same. [4M]
e) Give the detailed classification of disposal of hazardous waste. [4M]
f) What are the various elements to be considered in sustainable development? [3M]
PART ?B
2 a) Explain in detail about the effects and sources of Carbon Monoxide and Sulfur
dioxide pollutants.
[8M]
b) What are the various sources and effects of Noise pollution? Explain each in
detail.
[8M]
3 a) Discuss in detail about various important contaminants of Concern in Industrial
Wastewater management.
[8M]
b) State and explain any two strength reduction methods of waste.
[8M]
4 a) Give the detailed classification of wastes according to their origin and type. [8M]
b) Explain the 4R?s concept in solid waste management.
[8M]
5 a) Discuss the treatment parameters involved in sanitation of public bathing places. [8M]
b) State the factors governing the sanitation process at social gatherings.
[8M]
6 a) Enumerate the characteristics of Electronic wastes. [8M]
b) What are the various economical control methods adopted for nuclear hazardous
wastes.
[8M]
7 a) Discuss the importance of Climate change and Biodiversity in sustainable
development.
[8M]
b) State the impacts of industrialization on sustainable development. [8M]
*****

R13
SET – 3 Code No: RT32016A

III B. Tech II Semester Regular/Supplementary Examinations, April – 2018
ENVIRONMENTAL POLLUTION AND CONTROL (Civil and ECE)
Time: 3 hours Maximum Marks: 70
Note: 1. Question Paper consists of two parts (Part-A and Part-B)2. Answering the question in Part-A is compulsory
3. Answer any THREE Questions from Part-B
*****
PART ?A
1 a) Explain the causes and effects of Outdoor pollution. [3M]
b) State the various sources of industrial wastewater management. [4M]
c) Enlist various types of wastes. [3M]
d) Show the classification of sanitation system. [4M]
e) What are the characteristics of Biomedical wastes? [4M]
f) Enlist the factors needed to achieve sustainable development. [4M]
PART -B
2 a) Explain the working principles of any one particulate controlling device. [8M]
b) Explain the measuring devices adopted for noise pollution.
[8M]
3 a) Discuss in detail various steps involved in waste volume reduction. [8M]
b) What is the significance of recirculation of industrial wastes? Explain the principle
involved in it.
[8M]
4 a) By means of a neat sketch, detail the characteristics of solid waste. [8M]
b) Explain in brief the health and environmental hazards of solid waste.
[8M]
5 a) Explain how rural sanitation is different from any other sanitation process adopted
for commercial buildings.
[8M]
b) State the parameters involved in the treatment of public bathing places and
institutions.
[8M]
6 a) Discuss in brief any two control methods of disposal of Nuclear wastes. [8M]
b) By means of a neat sketch, show the treatment process involved in hazardous
wastes.
[8M]
7 a) Discuss the importance of Nutrient and hydrological cycles in sustainable
development.
[8M]
b) Enumerate the principles of sustainable development. [8M]
*****
R13
SET – 4
Code No: RT32016A